1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Frist time water cooling

Discussion in 'Build Log' started by wired, Jun 1, 2018.

  1. wired

    wired New Member

    Built this for my brother in law. My first attempt at water cooling. It cam out nice.
    Lian Li case, Thermaltake fans, 2x EK rads and EK fittings, Singularity d5 pump and res, Cable mod wires, Mayhem coolant.

    First time PETG tube bending came out nice was easier then I thought it would be. Long way to go to have it as clean as some builders I have seen.

    Currently started building my own rig.
     

    Attached Files:

  2. wired

    wired New Member

    New build This time for me!
    [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG]
    Still have a long way to go. Wires still need to be cleaned up in the back of the rig. About to order wire hold downs and start making my own cables. Making the cables take a lot of time but it costs less and you can make each wire the exact length. The case has glass on all sides so the wires have to be clean.
    Current parts list
    Thermaltake View 71 TG
    6x Corsair LL 120mm fans
    1x Corsair LL 140mm fan
    2x EK 360mm rads
    Corsair RX1000i PSU
    EVGA GTX 1080 TI FTW3
    Asus Maximus X Formula MOBO

    Planned parts
    I7 8700K cpu
    64 gig Corsair Dominator Ram
    EK water block for GPU
    EK water block for CPU
    EK water Block for RAM
    EK PETG tubing
    Singularity D5 pump
    Singularity 250mm res. ( hope it will fit )
    Singularity res mounts
    Bitpower fittings
    Mayhem pastel orange coolant
    Custom wire set with MDPC-X sleeve
    Samsung 2TB M.2 SSD

    I think that covers all my parts. I will update as the build goes. If you see something I should watch out for let me know.
     
  3. Graham

    Graham New Member

    Nice builds
     

Share This Page